Call Us Today!1(844)WEROOF1
page-header-img

Item Category: Envelopes & Mailers

12 volt 20 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive

12 volt 20 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive

July 22, 2026
0 Comment

12 volt 20 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive 12Volt 20Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 20A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 20 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info:An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.Operating temperature: -10° F to 150° F.Storage temperature: -20° F to 200° F.Engineered for durability.Breakers include nuts and washers. Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!12Volt 20Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 20A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 20 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info: An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. ---Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools. ---Operating temperature: -10° F to 150° F. ---Storage temperature: -20° F to 200° F. ---Engineered for durability. ---Breakers include nuts and washers. 12 volt 20 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive 12Volt 20Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 20A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 20 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info:An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.Operating temperature: -10° F to 150° F.Storage temperature: -20° F to 200° F.Engineered for durability.Breakers include nuts and washers. Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! 12Volt 20Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 20A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 20 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info:An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.Operating temperature: -10° F to 150° F.Storage temperature: -20° F to 200° F.Engineered for durability.Breakers include nuts and washers.

+ Read More
12 volt 30 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive

12 volt 30 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive

July 22, 2026
0 Comment

12 volt 30 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive 12Volt 30Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 30A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 30 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 30 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 30 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info:An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.Operating temperature: -10° F to 150° F.Storage temperature: -20° F to 200° F.Engineered for durability.Breakers include nuts and washers. Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!12Volt 30Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 30A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 30 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 30 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 30 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info: An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. ---Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools. ---Operating temperature: -10° F to 150° F. ---Storage temperature: -20° F to 200° F. ---Engineered for durability. ---Breakers include nuts and washers. 12 volt 30 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive 12Volt 30Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 30A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 30 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 30 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 30 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info:An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.Operating temperature: -10° F to 150° F.Storage temperature: -20° F to 200° F.Engineered for durability.Breakers include nuts and washers. Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! 12Volt 30Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 30A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 30 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 30 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 30 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info:An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.Operating temperature: -10° F to 150° F.Storage temperature: -20° F to 200° F.Engineered for durability.Breakers include nuts and washers.

+ Read More
12 Volt 40 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive

12 Volt 40 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive

July 22, 2026
0 Comment

12 volt 40 Amp DC Auto Reset Circuit Breaker Type 1 for Wind Turbine Application 12 Volt 40 Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 40A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 40 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 40 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 40 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info:An auto-reset automotive circuit breaker provides continuous operation during an over-current condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of over -urrent is found and then corrected. These 12V circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. Constructed with internal composite alloy material to deflect and separate the contacts when an over-current situation occurs and return to the run mode as it cools.Operating temperature: -10° F to 150° F.Storage temperature: -20° F to 200° F.Engineered for durability.Breakers include nuts and washers. Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!12Volt 40Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 40A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 40 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 40 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 40 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info: An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. ---Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools. ---Operating temperature: -10° F to 150° F. ---Storage temperature: -20° F to 200° F. ---Engineered for durability. ---Breakers include nuts and washers. 12 volt 40 Amp DC Auto Reset Circuit Breaker Type 1 for Wind Turbine Application 12Volt 40Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 40A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 40 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 40 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 40 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info:An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.Operating temperature: -10° F to 150° F.Storage temperature: -20° F to 200° F.Engineered for durability.Breakers include nuts and washers. Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! 12Volt 40Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 40A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 40 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 40 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 40 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info:An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.Operating temperature: -10° F to 150° F.Storage temperature: -20° F to 200° F.Engineered for durability.Breakers include nuts and washers.

+ Read More
1200W Wind Turbine Generator Kit 5 Blades Windmill DC 12/24V Charger Controller

1200W Wind Turbine Generator Kit 5 Blades Windmill DC 12/24V Charger Controller

July 22, 2026
0 Comment

Need Help? Contact Us 9:00am-2:00am PST Sunday-Friday FAST SHIPPINGWITHIN 24 HOURS 100% MONEY BACK GUARANTEEBUY WITH CONFIDENCE American BusinessALL ITEMS IN STOCK IN CALIFORNIA American STANDARD PRODUCTSQUALITY GUARANTEED 1200W Wind Turbine Generator Unit 5 Blades DC 12V With Power Charge Controller WHY SHOP WITH FACTORY-SUPPLIES? Excellent product at an excellent price,Fast shipping,Highly recommend,A+++ ( e***a ) Item was as described and arrived quickly. Great Seller to deal with. Awesome! ( o***f ) I could not be any happier my purchase! and service! Great!!! Thank you ( a***5 ) DESCRIPTION This is a 1200 watts wind turbine & 12V controller. Max daily output is at 1.4KW. It also works when there is only the wind power or solar power, getting single power. This wind generator is a real powerhouse and a useful addition to solar energy. Well suited for the leisure sector, it is famous for battery charging on boats, gazebos, chalets or mobile homes. The wind generator takes at least air movement and provides reliable even during storms electricity. The aerodynamically optimized nylon blades are absolutely unbreakable and keep strong loads. Closed maintenance-free ball bearings ensure not only lightness, high efficiency and low wear. They have an enormous charge current even at low wind speeds. It is perfect for green windmill, homes, businesses, and industrial energy supplementation! The series of wind turbine with high-quality aluminum alloy and stainless steel parts, the machine is not only light weight, small size, shape is also better than similar products. The motor uses a unique magnetic circuit design, so its starting torque is very small, and it can effectively guarantee the wind turbine's breeze start capability. The series of wind turbine blades is designed to meet the principles of aerodynamics, leaf materials used in foreign imports of high-strength plastic plus 30 percent of carbon fiber elements and anti-UV anti-corrosion materials synthetic injection molding. Wind wheel running smoothly, reliable, quiet. The fan operating temperature is 30 degrees to 60 degrees, so it applies to most parts of the world. The series of wind turbine surface is coated with a special process, so in any harsh conditions its antioxidant and anti-corrosion ability is the first class. The series of wind turbines fetures with high power generation efficiency, breeze start, long life, corrosion resistance, waterproof performance, anti-sand and so on. Features High efficiency Friendly environmental Possibly made hybrid system with solar panel Low start-up speed, high wind power utilization, light, cute, low vibration Human-friendly design, easy to install and maintain Blades using reinforced glass fiber, helped with optimized structure and aerodynamic shape Enhancing wind power coefficient and power generating capacity Using patented permanent magnet generator and special stator Effectively reducing torque resistance and guarantees the stability Maintenance-free sliding contact (free from charcoal) guaranteeing a good current flow No twisting of the mast cable Beening sold and being in use worldwide Providing 0.6~1.5 KW power in 24 hours to meet the needs Perfect for green windmill, homes, businesses, and industrial energy supplementation CE Certification, RoHS Certification and ISO9001 Certification 2 Year Warranty SpecificationS Rated Speed : 800r/min[RPM] Rated Power : 1200W Tower Diameter : >80 mm(3.2in) Rated Voltage : DC27-54V Tower Height : 4.5m-10m(15-33in) Battery Voltage : DC12V Battery Capacity : 200AH-400AH Start-up Wind Speed : 2.5m/s(8in/s) Rated Wind Speed : 12m/S(35in/s) Number of Blades : 5 Material of Wind Leaf : PBT Rotor Diameter : 1.2m(4in) Packing Dimension : 687*365*210mm(27inx14.4inx8.3in) Product Life : 15 years Warranty : 2 year Certification : CE, RoHS, ISO9001 IN the Box Wind Turbine x 1 Set Screws and Nuts x 1 Controller (12/24V) x 1 Blades x 5 Nose Cone x 1 Instruction Manual x 1 ABOUT US Our company is a leading professional eBay Megastore headquartered in California, We deliver a wide range of products, from Industrial supplies to economical lifestyle goods, to provide you with a premium eBay experience. We offer detailed product descriptions and images to give you a real advantage in finding the products you're looking for. We strive to deliver a wide range of unique and high quality products, sourced directly from top manufacturers and sold at bargain prices. With a cutting edge online operating system and fantastic customer support, buyers are guaranteed to receive quick replies to enquiries, prompt delivery to your home or business, and outstanding after-sales service. PAYMENT We accept Paypal payment only. Payment should be completed within 3 days of auction closing. Or unpaid dispute will be filed for closing auction. Delivery All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. We aim to dispatch all products within one working day after your full payment is made. If you need to cancel a purchase after the product has been dispatched, please note that the postage fee may not be refundable. Additional postage fees may apply for re-delivery or re-direction requests. Orders placed on weekend will be shipped within 2 days. Some products may be dispatched in more than one carton. International Buyers – Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. UPS/FEDEX: 3-5 business days. | USPS: 2-6 business days. | Truck company: 3-8 business days. We only ship to the Lower 48 states, and we do not ship to FPO, APO or PO Box addresses. Returns & Warranty We provide return & refund service within 60 days after the buyer receives the product. (product kept in original condition, a restocking fee may apply). We guarantee the product to be new and free of manufacturer defects for 1 year for the original purchaser only. If you have a problem with the product. Please contact us through eBay and include the original purchase information (i.e. your name , address, email and purchase receipt number). We will require a picture of the damaged part for verification. We will repair or replace, at our discretion, any unit determined to be faulty within the warranty period. The unit warranty does not cover accidents, develop a fault due to misuse or improper installation. The buyer will be liable for the shipping costs associated with warranty claim.

+ Read More