page-header-img

Item Category: Test Meters & Detectors

USED – MILLITECH Electromechanical Waveguide Switch & Driver 45512H-1002 – WR-22

USED – MILLITECH Electromechanical Waveguide Switch & Driver 45512H-1002 – WR-22

Manufacturer: Millitech. Includes Waveguide & Switch Driver. When you buy an item it will not be listed as a "gift". It will be valued at exactly the price you paid. (zip 37370).

Quinstar QWZ-VT2800 Electromechanical Waveguide Switch WR15 V-Band

Quinstar QWZ-VT2800 Electromechanical Waveguide Switch WR15 V-Band

At Silicon Salvage, we turn the complex challenge of e-waste into a clear, secure, and sustainable process. — the answer is Silicon Salvage. Local Pickup — available for you or a designated party. Used and in Excellent Condition and may show signs of prior use consistent with its age.

HP 11518A (WR-62) 12.4 to 18 GHz, Waveguide Taper Adapter

HP 11518A (WR-62) 12.4 to 18 GHz, Waveguide Taper Adapter

P752D-20DB Waveguide Directional Coupler 12.4 TO 18 GHZ, 20DB

P752D-20DB Waveguide Directional Coupler 12.4 TO 18 GHZ, 20DB

P752D-20DB Waveguide Directional Coupler 12.4 TO 18 GHZ, 20DB Here at the Resion LLC. we pride ourselves in customer satisfaction and service. If there is any additional information needed such as shipping and handling charges, pictures, serial numbers, options, etc. please don't hesitate to send a request through EBay. All requests will be answered immediately.Please check out all the unique items in our eBay store including a wide selection of electronic components such as ICs, resistors, capacitors, connectors, as well as wires, switches, terminals, Circuit breakers and so much more! If you don't see what you want to contact and we will check our inventory.Company Hours of Operation: Monday thru Friday, 9:00 AM to 5:00 PM, EDT; closed weekendsReturns - We have a 30-day return policy on all our items.Any problems upon receipt of the item must be informed to us through eBay Messages, we will be happy to assist you. All items must be returned in the same original condition as received with all accessories.Contact us: If you have questions about the product or your order please contact through via eBay Messages for assistance.

73892029 P-Band 70-Deg Angle Elbow 12.4-18GHz RF Microwave Waveguide Section

73892029 P-Band 70-Deg Angle Elbow 12.4-18GHz RF Microwave Waveguide Section

RF Microwave Waveguide Section. 70-Deg Angle Elbow. 12.4 - 18 GHz.

HP DIRECTIONAL COUPLER MODEL: P752A WR-62 P-band 12.4-18 GHz 3dB

HP DIRECTIONAL COUPLER MODEL: P752A WR-62 P-band 12.4-18 GHz 3dB

exact item shown. 13-3/4 long Features • High coupling accuracy • Excellent directivity • Low SWR Applications • Measure reflection coefficient (SWR) • Mix two signals • Monitor power • Isolate signal source or wave meter Description High directivity makes the Model 752 particularly well suited for measuring very small reflections and for rapidly adjusting transmission line flatness over the entire wave guide frequency range. Each coupler has an overall directivity of better than 40 dB see figure 1), very low reflections, and a smooth coupling variation vs. frequency (see Figure 2). Performance characteristics are unaffected by humidity, temperature, or time, making these units especially useful as standards of microwave attenuation. Coupling factors are 3, 10, and 20 dB; mean coupling accuracy is ±0.4 dB (±0.7 dB for K- and R-bands), and coupling variation vs. frequency is ±0.5 DB (0.6 dB for R752D). Each coupler is supplied with coupling factor data at five frequencies across the band. Used together and connected back-to-back, the directional couplers are most useful with the 8350 or 8340 Series sweepers in broadband reflection and SWR measurements. One directional coupler samples power traveling to the load, while the other samples power reflected from the load. Used with two 424A crystal detectors, measurements of SWR versus frequency can be made easily. The detected output of the forward coupler is used to level the sweeper, and the detected output of the reverse coupler is presented on an oscilloscope calibrated in SWR.* When used with unleveled sweepers, the output of both couplers can be applied to the 8510 network analyzer or the 8756 or 8757 scalar network analyzers to display relation coefficient directly. A Matched “Hybrid Tee” with Low SWR Since the 3 dB coupler has the high directivity of the 10 and 20 dB couplers, it can usually be used in place of the hybrid tees. The 3 dB multi-hole coupler, unlike the hybrid tee, is a matched device, having an output SWR (either arm) of 1.15 or less over a waveguide frequency range. Ordering Information For more information on the Agilent U752D waveguide coupler (40 to 60 GHz, 20 dB), please go to www.agilent.com and search on “waveguide coupler” Note to me: 3rd black drawer I normally ship within 24 hours of your order, but the post office does not always initiate tracking when I put the packages in the drop off box. Check out my other items!