Secures 2x4 Walers to Side Rails Fast & Easy!Sandbaggy One-Piece Waler Clamps provide reliable fastening of walers to side rails in concrete forming systems. Just place a single or double 2"x4" piece of lumber on top of the these concrete form brackets, then drop the wedge to tighten.Strong durable, and resistant to corrosion, Sandbaggy One Piece Waler Clamp is made from 5 gauge steel. Ideal for use in demanding concrete forming applications where it will be exposed to the elements. Sandbaggy waler clamps are for sale at wholesale prices.Compatible with most standard modular forming systems, including but not limited to:Ellis Pro-FormEMI EliteSymons Steel-PlySandbaggy carries a variety of concrete forming supplies.FeaturesEasy to install: One-Piece Waler Clamps fit quickly into any unused side rail holes, just place a single or double 2x4 on top, then position the wedge. No extra parts necessary.Easy To Remove: Tap the wedge with a hammer to detach the clamp. Then, lift the wood off of the bracket and dismount the bracket from the side rail opening.Construction Grade Strength: One-piece waler clamps are crafted from ultra-durable 5 gauge steel and designed to tackle the toughest concrete forming tasks.Compatible With Most Modular Forming Systems: Including but not limited to Ellis Pro-Form, EMI Elite, and Symons Steel-Ply brands.Reduces Installation Time & Labor Costs: Eliminate the need to install separate brackets and wedges.Properly Secures 2x4 Walers To Side Rails! Improving the quality of your concrete finishes and extended the life of your concrete forms. Rust Resistant / Reusable: Built to last, made from rust resistant steel it will resist corrosion even in the harshest environments, so you can reuse it for multiple projects.FAQWhat is a waler clamp used for?Waler clamps are 2x4 clamps used to attach walers to form side rails. These horizontal members provide support and stability to concrete forms. Clamp installation helps optimize concrete finish quality & form longevity.How do I install a one-piece waler clamp?To install a one-piece waler clamp, simply follow these steps:Insert the bracket into any side rail hole not being used for ties.Place a single or double 2x4 on top of the bracket.Drop the wedge into position.Strike the wedge with a hammer to tighten the clamp around the waler.How do I remove a one-piece waler clamp?To remove a one-piece waler clamp, simply follow these steps: Strike the wedge with a hammer to loosen the clamp.Lift the 2x4 off of the bracket.Remove the bracket from the side rail hole.Please note that these are general instructions. It is always a good idea to consult the manufacturer's instructions for your specific one-piece waler clamp.
Secure Aluminum Formwork Systems with Our Round Head Concrete Form Pins! Secure your aluminum formwork efficiently with our round head aluminum form pin. These concrete form pins are heat-treated for extra strength, and designed to use with ties and wedges to create a strong, secure hold. Compatible with both curved and straight wedge options, as well as full and nominal ties, to securely lock aluminum formwork panels in place for concrete wall construction. The tapered shape and 15/16" round head make it effortless to insert and remove, while the shank prevents pin sag, resulting in simpler stripping. Please note * Curved Aluminum Form Wedge Sold Separately For orders of 30,000 or more, lead time is 60 days. Sandbaggy carries a variety of concrete forming supplies and accessories. Features Secure Aluminum Formwork! These concrete form pins are heat-treated for extra strength, and designed to use with ties and wedges to create a strong, secure hold. Compatible With Multiple Ties & Wedges: Use with curved wedges or straight wedges, full ties & nominal ties to secure aluminum formwork panels. Construction-Grade Strength: Steel has been heat treated to increase the steel's strength and durability. 1" Wedge Milled Slot for easy and accurate wedge installation. Easy To Install: Tapered design and 15/16" round head. Easy to Remove: The shank is crafted to prevent pin sag and enhance stripping efficiency. Reusable: Yes FAQ What are other names for concrete pins? Concrete Pins is a general term, they may also be known as Form Pins and some may even resemble or serve a similar function as wedge bolts. What is heat-treated steel? The process of heat treatment involves subjecting steel to controlled heating and cooling in order to modify its physical characteristics. Some advantages of heat treatment include: Increased Strength Improved Toughness - more resistant to cracking or breaking under pressure. Enhanced Ductility (In some cases) - meaning it can deform without breaking. Stress Relief - relieves internal stresses in steel that can occur during manufacturing processes.
Empty Woven Polypropylene Sandbags - Made by Sandbaggy Used for Flood Control, Disaster Preparation, Building Retention/Retaining Walls, and Preparing for Emergencies. Features WIDELY TRUSTED: Sandbaggy sandbags are used by many government agencies, landscapers/contractors, and nonprofits including the US Army and Red Cross.Whether for hurricanes on the East Coast or flooding in the Midwest, Sandbaggy sandbags have been there every step of the way as the first and last line of defense for the homes and businesses of everyday Americans. MILITARY GRADE: Used by the US Army, Sandbaggy sandbags are truly military grade (and military green too). With a double stitched bottom and a 50 lb weight capacity, these heavy duty Sandbaggy Sandbags can be filled with sand or gravel. Our sandbags have a 14-inch wide opening, making them easy to fill and use. UV PROTECTION: Made with a UV Inhibitor that allows sandbag to last 6 months under direct sunlight in hot, sunny places such as California, Florida, and Arizona. In cooler regions of the country, our sandbags can last 6 to 24 months depending on the amount of sun exposure on a day to day basis. CUSTOMERS LOVE THEM: “These bags did the job perfectly!” - Allan L. “Bags were sturdy, very well made. Would def buy again.” - S. Hoffman. “Amazing sandbags. Ordered multiple times” - Christopher R. Sandbaggy has been in business for more than 10 years. We're lucky to be able to serve such incredible customers every day to help protect their homes and businesses with sandbag walls, prevent erosion, and ensure temporary signs stay in place to keep drivers safe on the road. #1 BEST SELLER: Sandbaggy Sandbags are the #1 best selling sandbags on the Internet, with over 4 million Sandbaggy Sandbags installed across this great country. FEATURED IN PRESS: Sandbaggy has been written up by Fox, Daily Herald, MarketWatch and other news outlets for leading the industry Sandbags are an inexpensive solution to avoid damages to your property. With a flood barrier built around your house, your house will be saved from floods. Since the invention of sandbags, they have been able to save tens of thousands of homes from being flooded. Our rugged Sandbaggy sandbags are made with thick weaves allowing for heavy-duty applications like sandbagging, landscaping, construction, and building flood barriers. Our tough, coarsely-woven sandbags can be used for so many different applications. Other names for Sandbags: Poly Bags, Sandbag, Sandbagging, Empty Sandbags, Sand bags, Military Sandbags, Polypropylene Bags, Sand bag
Sandbaggy Onion Mesh Bag AVAILABLE IN 4 SIZES - 15" x 25" or 18" x 30" or 21" x 31.5" or 24" x 35" Please note - 24" x 35" Size is only available in Green colorLARGE INCH MESH BAG - Made of industrial grade polypropylene with reinforced seams for a stronger bag50 LB WEIGHT CAPACITY - Can hold up to 50 lbsGREAT FOR - packaging onions, potatoes, apples, onions, peppers, potatoes and cornBREATHABLE & SEE-THROUGH FABRIC - Allows product inside to be easily visible from the outside & allows produce to release excess moisture to extend shelf life How Sandbaggy Mesh Bags Beats the Competition? Video will open in a new window Using the mobile app? Copy this link into your browser:
Secure Wood-to-Concrete With These Sturdy Steel Square Washer! Constructed from sturdy 6 gauge steel, this 3" x 3" galvanized square plate washer (also known as a bearing plate) is designed for use with 5/8" diameter anchor bolts or rods. Its heavy-duty design prevents pull-through and promotes a secure connection, while increasing the bearing surface to prevent wood splitting or cracking. Ideal for anchoring wood to concrete slabs, this washer provides long-lasting structural stability. These square plate washers are hot-dip galvanized for superior rust protection compared to electro-galvanized products, making them highly durable and built-to-last! We also have a non-galvanized option available. Hole Sizes Available in 2 Options Standard: 5/8" DiameterSlotted: 5/8" Wide x 1-1/2" Long Features Hot-Dipped Galvanized: Coated with a thick layer of zinc through a hot-dip galvanization process, offering exceptional corrosion resistance and making them perfect for use in outdoor and harsh environments. Compatible With 5/8" Anchor Bolts or Rod: Hole width is 5/8", the flat square washer design distributes anchor bolt load over a larger surface area. Ensures Secure Wood-To-Concrete Connection: Prevents anchor bolt pull-through in wood Prevent Wood Splitting or Cracking that may occur around the anchor bolt, ensuring structural stability and integrity. Heavy 6 Gauge Steel: Constructed from 5 mm thick steel to promote long-lasting structural stability. Maintains Alignment: Square shape prevents rotation and maintains alignment under stress. FAQ Hot Dipped Galvanized vs Electro Galvanized Steel In short hot dipped galvanized steel offers more rust protection, while electro galvanized steel has a smoother finish and is better for applications requiring tight tolerances. Hot-dipped galvanized steel is dipped into a vat of molten zinc, which coats the steel, resulting in a strong, thick, dull gray finish that lasts 20-50 years. Often used for building materials designed for structural support. Electro-galvanized steel is coated with a layer of zinc through an electrically charged solution, resulting in a relatively thin zinc layer and a smooth finish. Often the preferred choice for applications that demand tight tolerances, wires, or small parts found in appliances. What are square washers called? Square washers, also referred to as construction washers, plate washers, or fish plates in certain contexts. Why use square washers? Square washers offer several advantages over traditional round washers: Increased load distribution: They provide a larger surface area to distribute the load of a bolt or screw, reducing pressure and preventing damage to the underlying material. Prevent rotation: Their square shape helps prevent the fastener from rotating, ensuring a secure connection. What is the difference between a flat washer and a square washer? Square washers are a type of flat washer, though flat washers generally refer to round washers. Shape: Flat washers are round, while square washers are, well, Load distribution: Square washers generally have a larger surface area than flat washers of the same nominal size, offering better load distribution.
Fast, Reliable Anchoring For Concrete Projects! Our 1/2" Drop In Concrete Anchors (Zinc Plated) are essential for secure installations in solid concrete environments. These female threaded concrete anchors are designed for dry applications and provide reliable fastening with consistent holding values. Each anchor is precision-engineered with internal national coarse threads, ensuring compatibility with 1/2" diameter threaded rods or bolts. See installation instructions below. Sandbaggy carries a variety of concrete forming supplies. Features Textured End For Additional Holding Strength! Unlike other drop-in threaded concrete anchors on the market, Sandbaggy’s drop-in anchor features a smooth wall with a textured end for additional grip in concrete. Internal National Coarse Threads: 1/2" drop in anchor facilitates easy selection and installation of threaded rods or bolts. Flush Mounting: After installation, nothing protrudes above the concrete surface, maintaining a clean and professional finish. Consistent Holding Values: Drop in concrete anchors are ideal for applications requiring uniform expansion for reliable fastening in concrete. Solid Concrete Use: Suitable exclusively for installation in solid concrete, providing robust anchorage in stable environments. Zinc Plated, Ideal For Dry, Indoor Applications: Ideal for indoor environments where dry conditions prevail, ensuring reliable performance over time. The zinc plated exterior provides a layer of protection from rust and corrosion. Installation Instructions Prepare the Hole: Drill a 5/8" hole into the concrete using a carbide-tipped bit meeting ANSI Standards B212.15. Ensure the depth of the hole is equal to or greater than the minimum embedment depth of 2". Clean the Hole: Remove debris from the hole using a wire brush, vacuum, compressed air, or a blow-out bulb to ensure a clean installation. Insert the Anchor: Place the drop-in anchor into the hole with the open threaded end facing upwards. Set the Anchor: Use the appropriate setting tool for 1/2" Drop In Concrete Anchors Zinc Plated. Insert the tool into the anchor and strike the end firmly with a hammer until the anchor is fully set. Final Adjustment: Once set, the anchor is ready for use. Insert a 1/2" diameter threaded rod or bolt into the anchor and tighten with a maximum torque of 20 ft. lbs. Please Note Minimum edge distance: 3-1/8" Minimum fixture hole diameter (in place): 11/16" Minimum fixture hole diameter (hole spotted): 1/2" Maximum torque: 20 ft./lbs. Bolt length: Fixture Thickness + Embedment Depth FAQ What size drill bit for 1/2" drop in anchor? To install a 1/2-inch drop-in anchor, you typically need to use a 5/8-inch drill bit. This allows for a proper fit that ensures the anchor can be securely placed into the drilled hole. What is a drop in anchor? A drop-in anchor is a fastener used in concrete, brick, or stone materials to create a secure connection point for bolts or threaded rods. It consists of an internally threaded sleeve and a cone-shaped expander plug that, when installed correctly, provides a firm hold. How does a drop in anchor work? Drop-in anchors are installed by drilling a hole to the necessary depth in concrete/masonry. The anchor is inserted with its lip flush against the surface, and a setting tool drives the internal plug into the sleeve. This creates a dependable anchor point for attaching machinery, fixtures, etc.
