Picture shown above is example and each length have different amount of threads are on the shaft thread are decreases as length increases. These are industry standard screws. Sharp point tip. Improper use / application / or use of impact drivers on certain size and type of fasteners may cause the heads to break off you might need to drill pilot holes the screws might even break despite pilot holes depending on the screw, type of wood and/ or the toque used to drive the screw etc.
Adopting high-precise cutting technology, the screws thread is very precise, clean, and sharp, the deep clear thread and sharp point can easily penetrate the wood and plastic and ensure a secure hold, is not easy to deform and slid while using.
Can achieve the effect of connection tightening. Adopting high-precise cutting technology, the screws thread is exact, clean, and sharp, the deep clear thread and sharp point can easily penetrate the wood and plastic and ensure a secure hold, is not easy to deform and slide while using.
New Proferred Max Drive #10 Star (Torx) Drive Flat Head w/ Nibs Deck Screws with a Sharp serrated needle point. These are made from Steel with a Heavy-Duty SKTII coating for an extremely durable product. Serrated Self-Cutting Threads for extremely fast penetration & reduced fatigueDeeper 6-Lobe (Torx) drive recess for tight bit engagementReverse 'Alterna-thread' section to pull down secondary wood layer (decking) to main layerCompatible for ACQ treated wood, AC257 ApprovedSKT Coating - 1500 hour salt spray test!#10 x 2" - 5 LBS, approx. 530 pieces, Bulk Pail 1,800 pieces w/ 2 Bits #10 x 2-1/2" - 5 LBS, approx. 437 pieces, Bulk Pail 1,500 pieces w/ 2 Bits#10 x 3" - 5 LBS, approx. 369 pieces, Bulk Pail 1,200 pieces w/ 2 Bits#10 x 3-1/2" - 5 LBS, approx. 319 pieces, Bulk Pail 1,000 pieces w/ 2 Bits#10 x 4" - 5 LBS, approx. 281 pieces, Bulk Pail 900 pieces w/ 2 Bits Diameter: #10Thread Size: Coarse Thread (Standard)Length: Avail from 2" to 4" lengthsDrive: T-25 TorxType: Flat Head Deck Screws w Nibs, Sharp Needle Point, Star DriveSystem of Measurement: US / InchMaterial: SKTII coated Steel, Coating exceeds 1,500 Salt Test* * Reference for SKT Coating with competing coatings shown:Zinc plating 200 to 300 salt spray testHDG (Galvanized) 500 to 550 salt spray testDacromet e-cote 1,200 salt spray testProferred SKT 1,500 hour salt spray test!
Fastener Type Wood Screws. Quantity: Our white head screws set is a combination of #6 screws, which contains 6 sizes of #6 screws, including 2", 1-1/2", 1-1/4", 1", 3/4", and 1/2", 25 of each size, a total of 150 screws.
