Goulds GT20 IRRI Gator Pump Self Priming Single Phase Centrifugal 2 HP 230 Volts
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| UPC | 94701077393 |
| EAN | 94701077393 |
| Color | #N/A |
| Size | #N/A |
| Item Height | #N/A |
| Item Width | #N/A |
| Power Source | Electric |
| MPN | GT20 |
| Flow Rate | 88 Gallon/Minute |
| Outlet Diameter | 1 1/2 in |
| Brand | Goulds |
| Rated Power | 2 hp |
| Pump Housing Material | Cast Iron |
| Centrifugal Pump Type | Self-Priming |
| Inlet Diameter | 1 1/2 in |
| Supply Voltage | 230 V |
| Maximum RPM | 3450 RPM |
| Number Of Phases | 1 Phase |
Goulds GT20 IRRI Gator Pump Self Priming Single Phase Centrifugal 2 HP 230 Volts APPLICATIONS Specifically designed for the following uses:Lawn sprinklingIrrigationAir conditioning systemsHeat pumpsWater transferDewatering FEATURES Self-Priming DesignOnce pump is primed, filled with water, it never needs priming again even if water level drops below the end of the suction pipe. Pumping resumes once the water level rises above the end of the suction pipe. ServiceableBack pullout design allows disassembly of pump for service without disturbing piping.Two compartment motor for easy access to motor wiring and replaceable components. Diffuser (Guidevane) Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Impeller F.D.A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Corrosion ResistantElectro-coat paint process is applied inside and out, then baked on. Casing Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings providedfor vacuum gauge and casing drain. Powered for Continuous Operation Pump ratings are within the motor manufacturer's recommended working limits. Can be operatedcontinuously without damage. Mechanical SealCarbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry. SPECIFICATIONS Pump:Pipe connections: 1 1/2 NPT suction 1 1/2 NPT dischargeCapacities: to 110 GPM at 5 foot suction lift.Heads: to 128 feet.Reprime capabilities: to 25 feet suction lift.Maximum working pressure: 125 PSIG.Maximum water temperature: 140_ F (60_ C).Rotation: clockwise when viewed from motor end.Motor:NEMA standard open drip proof.60 Hz, 3500 RPM.Stainless steel shaft.Single phase: Ê-1_ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset.Three phase: 230/460 V. Overload protection must be provided in starter unit. Starter and heaters (3) must be ordered separately.Optional TEFC motors are available.
Related Items
